Factory made hot-sale thermoplastic extrusion pump - GHK Series Polymer Melts Gear Pump – Vowa Detail:
Vacuum Reactor Discharge Pump—— High Pressure, Channel Heating
GHK Series Polymer Melts Gear Pump
GHK series melt gear pumps are especially suitable for the reaction and transportation of high temperature and high viscosity polymer melts that require high output pressure, such as resin, chemical fiber and other industries. They are generally installed in the lower part of the reactor and used as a feed pump. This series of melt gear pumps have good self-priming performance and can be used for conveying and pressurizing polymer materials under vacuum reaction conditions.
The main materials that can be conveyed by the melt gear pump are:
Polymer melt
PET PBT PTT
PA6 PA66 PA12
PE LDPE LLDPE HDPE HMWPE
PP EVA PB
PB PS HIPS ABS SAN
PC PEK PMMA POM
TPU PLA PBS
Other stock solutions, solutions, glues, oligomers, prepolymers, etc. in the polymer material industry;
It can also be used to transport hot melt adhesives, asphalt, paints, adhesives, pharmaceuticals, food, grease, fuels, oils, dyes, coatings, lubricants, polyols and other materials that do not contain particulate impurities.
Technical data:
Viscosity ： 1～30，000Pa•s （1,000～30,000,000cP）
Suction side pressure ： Vacuum（-0.05～-0.09MPa）～4MPa
Discharge side pressure ： 0～35MPa
Differential pressure ： 25MPa
Temperature ： ≤350℃
Heating method ： Fully Jacketed
HTM pressure ： ≤1.6MPa
Installation method
GHK series melt gear pumps are generally installed at the bottom of the reactor and are driven by a motor + reducer + universal coupling. The melt gear pump is a positive displacement forced delivery pump. The pump output flow can be adjusted by adjusting the pump speed. It is recommended Using frequency conversion speed regulation, can realize the nearly linear flow output of the gear pump.
Main structure of gear pump:
Rotor type: helical or spur gear
Heating method: Heat medium heating
Sealing structure:
■ Dynamic melt seal + packing seal
■ Mechanical seal
■ Dynamic seal with cooling melt
■ High temperature resistant packing seal
Main structural materials of melt gear pump:
Pump casing: stainless steel/alloy steel/corrosion-resistant alloy
Gear: Nitrided steel/tool steel/stainless steel + coating/corrosion resistant alloy
Bearing: tool steel/copper alloy/stainless steel + coating/corrosion resistant alloy
Pump size and Technical data
|
Model |
cc/r |
Inlet |
Outlet |
Max. flow rate m3/h |
Temp |
||||
|
Low |
Medium |
High |
Ultra high |
||||||
|
＜50Pa.s |
50～200Pa.s |
200～2000Pa.s |
＞2000Pa.s |
||||||
| GHK-5 |
5 |
Vacuum -0.09～4.0 |
≤35.0 |
0.041 |
0.027 |
0.019 |
0.012 |
≤350℃ |
|
| GHK-10 |
10 |
0.081 |
0.054 |
0.038 |
0.024 |
||||
| GHK-20 |
20 |
0.162 |
0.108 |
0.076 |
0.049 |
||||
| GHK-32 |
32 |
0.259 |
0.173 |
0.121 |
0.078 |
||||
| GHK-50 |
50 |
0.405 |
0.270 |
0.189 |
0.122 |
||||
| GHK-75 |
75 |
0.527 |
0.365 |
0.243 |
0.162 |
||||
| GHK-100 |
100 |
0.702 |
0.486 |
0.324 |
0.216 |
||||
| GHK-160 |
160 |
1.123 |
0.778 |
0.518 |
0.346 |
||||
| GHK-200 |
200 |
1.404 |
0.972 |
0.648 |
0.432 |
||||
| GHK-250 |
250 |
1.620 |
1.080 |
0.675 |
0.473 |
||||
| GHK-355 |
355 |
2.3 |
1.5 |
0.9 |
0.7 |
||||
| GHK-500 |
500 |
3.2 |
2.2 |
1.2 |
0.9 |
||||
| GHK-750 |
750 |
4.9 |
3.2 |
1.8 |
1.4 |
||||
| GHK-1000 |
1000 |
5.4 |
3.8 |
2.2 |
1.9 |
||||
| GHK-1200 |
1200 |
6.5 |
4.5 |
2.6 |
2.3 |
||||
| GHK-1600 |
1600 |
8.6 |
6.0 |
3.5 |
3.0 |
||||
| GHK-2000 |
2000 |
10.8 |
7.6 |
4.3 |
3.8 |
||||
| GHK-2500 |
2500 |
10.8 |
8.1 |
4.7 |
4.1 |
||||
| GHK-3150 |
3150 |
13.6 |
10.2 |
6.0 |
5.1 |
||||
| GHK-4000 |
4000 |
13.0 |
10.8 |
7.6 |
6.5 |
||||
| GHK-6300 |
6300 |
20 |
17 |
10 |
9 |
||||
| GHK-8000 |
8000 |
22 |
17 |
13 |
12 |
||||
| GHK-9000 |
9000 |
24 |
19 |
15 |
13 |
||||
| GHK-12000 |
12000 |
32 |
26 |
18 |
16 |
||||
| GHK-18000 |
18000 |
49 |
39 |
27 |
24 |
||||
| GHK-25000 |
25000 |
68 |
54 |
38 |
34 |
||||
| GHK-38000 |
38000 |
103 |
82 |
57 |
51 |
||||
| GHK-54000 |
54000 |
146 |
117 |
82 |
73 |
||||
| GHK-80000 |
80000 |
216 |
173 |
121 |
108 |
||||
| Please consult the manufacturer for larger or smaller specifications | |||||||||
Product detail pictures:
Related Product Guide:
Gaining customer satisfaction is our company's aim forever. We will make great efforts to develop new and top-quality products, meet your special requirements and provide you with pre-sale, on-sale and after-sale services for Factory made hot-sale thermoplastic extrusion pump - GHK Series Polymer Melts Gear Pump – Vowa, The product will supply to all over the world, such as: Tajikistan , Chile , Kuwait , Besides strong technical strength, we also introduce advanced equipment for inspection and conduct strict management. All the staff of our company welcome friends both at home and abroad to come for visits and business on the basis of equality and mutual benefit. If you are interested in any of our items, please feel free to contact us for quotation and product details.
By Deborah
from Sheffield
- 2018.06.18 17:25
Company director has very rich management experience and strict attitude, sales staff are warm and cheerful, technical staff are professional and responsible,so we have no worry about product,a nice manufacturer.
By Christopher Mabey
from Slovenia
- 2017.11.01 17:04