Factory Promotional gear lube transfer pump - DLS Series Polymer Melts Gear Pump – Vowa Detail:
Booster Pump—— Low-pressure，Channel Heating
DLS Series Polymer Melts Gear Pump
DLS series melt gear pumps are suitable for reaction delivery and pressurization of high-temperature and high-viscosity polymer melts with lower output pressure, such as resin, chemical fiber and other industries. They are generally installed in melt pipelines and used as booster pumps; The body gear pump has a certain self-priming performance, and can be used to transport and pressurize polymer materials under lower vacuum suction conditions.
The main materials that can be conveyed by the melt gear pump are:
Polymer melt
PET PBT PTT
PA6 PA66 PA12
PE LDPE LLDPE HDPE HMWPE
PP EVA PB
PB PS HIPS ABS SAN
PC PEK PMMA POM
TPU PLA PBS
Other stock solutions, solutions, glues, oligomers, prepolymers, etc. in the polymer material industry;
It can also be used to transport hot melt adhesives, asphalt, paints, adhesives, pharmaceuticals, food, grease, fuels, oils, dyes, coatings, lubricants, polyols and other materials that do not contain particulate impurities.
Technical data:
Viscosity ： 1E-3～30，000Pa•s （1～30,000,000cP）
Suction side pressure ：（-0.00～-0.03MPa）～5MPa
Discharge side pressure ： 0～5MPa
Differential pressure ： 5MPa
Temperature ： ≤350℃
Heating ： Fully Jacketed
HT medium pressure ： ≤1.6MPa
Installation method
DLS series melt gear pumps are generally installed in the melt pipeline at the bottom of the reactor and used as booster pumps or metering pumps. They are driven by motor + reducer + universal coupling, or motor + reducer + flexible coupling. Shaft drive. Melt gear pump is a positive displacement forced delivery pump. The output flow of the pump can be adjusted by adjusting the speed of the pump. Frequency conversion speed regulation is recommended, which can realize the nearly linear flow output of the gear pump.
Main structure of gear pump:
Rotor type: helical or spur gear
Heating method: Heat medium heating
Sealing structure:
■ Dynamic melt seal + packing seal
■ Mechanical seal
■ Dynamic seal with cooling melt
■ High temperature resistant packing seal
Main structural materials of melt gear pump:
Pump casing: stainless steel/alloy steel/corrosion-resistant alloy
Gear: Nitrided steel/tool steel/stainless steel + coating/corrosion resistant alloy
Bearing: tool steel/copper alloy/stainless steel + coating/corrosion resistant alloy
Pump size and Technical data
|
Model |
cc/r |
Inlet |
Outlet |
Max. flow rate m3/h |
Temp |
|
|||
|
Low |
Medium |
High |
Ultra high |
|
|||||
|
＜50Pa.s |
50～200Pa.s |
200～2000Pa.s |
＞2000Pa.s |
|
|||||
| DLS-5 |
5 |
Vacuum -0.05～5.0 |
≤5.0 |
0.041 |
0.027 |
0.019 |
0.012 |
≤350℃ |
|
| DLS-10 |
10 |
0.081 |
0.054 |
0.038 |
0.024 |
|
|||
| DLS-20 |
20 |
0.162 |
0.108 |
0.076 |
0.049 |
|
|||
| DLS-32 |
32 |
0.259 |
0.173 |
0.121 |
0.078 |
|
|||
| DLS-50 |
50 |
0.405 |
0.270 |
0.189 |
0.122 |
|
|||
| DLS-75 |
75 |
0.527 |
0.365 |
0.243 |
0.162 |
|
|||
| DLS-100 |
100 |
0.702 |
0.486 |
0.324 |
0.216 |
|
|||
| DLS-160 |
160 |
1.123 |
0.778 |
0.518 |
0.346 |
|
|||
| DLS-200 |
200 |
1.404 |
0.972 |
0.648 |
0.432 |
|
|||
| DLS-250 |
250 |
1.620 |
1.080 |
0.675 |
0.473 |
|
|||
| DLS-355 |
355 |
2.3 |
1.5 |
0.9 |
0.7 |
|
|||
| DLS-500 |
500 |
3.2 |
2.2 |
1.2 |
0.9 |
|
|||
| DLS-750 |
750 |
4.9 |
3.2 |
1.8 |
1.4 |
|
|||
| DLS-1000 |
1000 |
5.4 |
3.8 |
2.2 |
1.9 |
|
|||
| DLS-1200 |
1200 |
6.5 |
4.5 |
2.6 |
2.3 |
|
|||
| DLS-1600 |
1600 |
8.6 |
6.0 |
3.5 |
3.0 |
|
|||
| DLS-2000 |
2000 |
10.8 |
7.6 |
4.3 |
3.8 |
|
|||
| DLS-2500 |
2500 |
10.8 |
8.1 |
4.7 |
4.1 |
|
|||
| DLS-3150 |
3150 |
13.6 |
10.2 |
6.0 |
5.1 |
|
|||
| DLS-4000 |
4000 |
13.0 |
10.8 |
7.6 |
6.5 |
|
|||
| DLS-6300 |
6300 |
20 |
17 |
10 |
9 |
|
|||
| DLS-8000 |
8000 |
22 |
17 |
13 |
12 |
|
|||
| DLS-9000 |
9000 |
24 |
19 |
15 |
13 |
|
|||
| DLS-12000 |
12000 |
32 |
26 |
18 |
16 |
|
|||
| DLS-18000 |
18000 |
49 |
39 |
27 |
24 |
|
|||
| DLS-25000 |
25000 |
68 |
54 |
38 |
34 |
|
|||
| DLS-38000 |
38000 |
103 |
82 |
57 |
51 |
|
|||
| DLS-54000 |
54000 |
146 |
117 |
82 |
73 |
|
|||
| DLS-80000 |
80000 |
216 |
173 |
121 |
108 |
|
|||
| Please consult the manufacturer for larger or smaller specifications | |||||||||
Product detail pictures:
Related Product Guide:
We depend on sturdy technical force and continually create sophisticated technologies to meet the demand of Factory Promotional gear lube transfer pump - DLS Series Polymer Melts Gear Pump – Vowa, The product will supply to all over the world, such as: Latvia , Bangalore , Thailand , Our company has abundant strength and possesses a steady and perfect sales network system. We wish we could establish sound business relationships with all customers from at home and abroad on the basis of mutual benefits.
By Joanne
from Singapore
- 2018.06.12 16:22
This is a very professional wholesaler, we always come to their company for procurement, good quality and cheap.
By Adelaide
from Zurich
- 2018.09.21 11:01