Quots for gear pumps for oil - ELS Series Polymer Melts Gear Pump – Vowa Detail:
Booster Pump—— Low-pressure，Electric Heating
ELS Series Polymer Melts Gear Pump
ELS series melt gear pumps are suitable for reaction delivery and pressurization of high-temperature and high-viscosity polymer melts with lower output pressure, such as resin, chemical fiber and other industries. They are generally installed in the melt pipeline and used as a booster pump; The body gear pump has a certain self-priming performance, and can be used to transport and pressurize polymer materials under lower vacuum suction conditions.
The main materials that can be conveyed by the melt gear pump are:
Polymer melt
PET PBT PTT
PA6 PA66 PA12
PE LDPE LLDPE HDPE HMWPE
PP EVA PB
PB PS HIPS ABS SAN
PC PEK PMMA POM
TPU PLA PBS
Other stock solutions, solutions, glues, oligomers, prepolymers, etc. in the polymer material industry;
It can also be used to transport hot melt adhesives, asphalt, paints, adhesives, pharmaceuticals, food, grease, fuels, oils, dyes, coatings, lubricants, polyols and other materials that do not contain particulate impurities.
Technical data:
Viscosity ： 1E-3～30，000Pa•s （1～30,000,000cP）
Suction side pressure ：（-0.00～-0.03MPa）～5MPa
Discharge side pressure ： 0～5MPa
Differential pressure ： 5MPa
Temperature ： ≤350℃
Heating ： Fully Jacketed
HT medium pressure ： ≤1.6MPa
Installation method
ELS series melt gear pumps are generally installed in the melt pipeline at the bottom of the reactor and used as booster pumps or metering pumps. They are driven by motor + reducer + universal coupling, or motor + reducer + flexible coupling. Shaft drive. Melt gear pump is a positive displacement forced delivery pump. The output flow of the pump can be adjusted by adjusting the speed of the pump. Frequency conversion speed regulation is recommended, which can realize the nearly linear flow output of the gear pump.
Main structure of gear pump:
Rotor type: helical or spur gear
Heating method: Heat medium heating
Sealing structure:
■ Dynamic melt seal + packing seal
■ Mechanical seal
■ Dynamic seal with cooling melt
■ High temperature resistant packing seal
Main structural materials of melt gear pump:
Pump casing: stainless steel/alloy steel/corrosion-resistant alloy
Gear: Nitrided steel/tool steel/stainless steel + coating/corrosion resistant alloy
Bearing: tool steel/copper alloy/stainless steel + coating/corrosion resistant alloy
Pump size and Technical data
|
Model |
cc/r |
Inlet |
Outlet |
Max. flow rate m3/h |
Temp |
|
|||
|
Low |
Medium |
High |
Ultra high |
|
|||||
|
＜50Pa.s |
50～200Pa.s |
200～2000Pa.s |
＞2000Pa.s |
|
|||||
| ELS-5 |
5 |
Vacuum -0.05～5.0 |
≤5.0 |
0.041 |
0.027 |
0.019 |
0.012 |
≤350℃ |
|
| ELS-10 |
10 |
0.081 |
0.054 |
0.038 |
0.024 |
|
|||
| ELS-20 |
20 |
0.162 |
0.108 |
0.076 |
0.049 |
|
|||
| ELS-32 |
32 |
0.259 |
0.173 |
0.121 |
0.078 |
|
|||
| ELS-50 |
50 |
0.405 |
0.270 |
0.189 |
0.122 |
|
|||
| ELS-75 |
75 |
0.527 |
0.365 |
0.243 |
0.162 |
|
|||
| ELS-100 |
100 |
0.702 |
0.486 |
0.324 |
0.216 |
|
|||
| ELS-160 |
160 |
1.123 |
0.778 |
0.518 |
0.346 |
|
|||
| ELS-200 |
200 |
1.404 |
0.972 |
0.648 |
0.432 |
|
|||
| ELS-250 |
250 |
1.620 |
1.080 |
0.675 |
0.473 |
|
|||
| ELS-355 |
355 |
2.3 |
1.5 |
0.9 |
0.7 |
|
|||
| ELS-500 |
500 |
3.2 |
2.2 |
1.2 |
0.9 |
|
|||
| ELS-750 |
750 |
4.9 |
3.2 |
1.8 |
1.4 |
|
|||
| ELS-1000 |
1000 |
5.4 |
3.8 |
2.2 |
1.9 |
|
|||
| ELS-1200 |
1200 |
6.5 |
4.5 |
2.6 |
2.3 |
|
|||
| ELS-1600 |
1600 |
8.6 |
6.0 |
3.5 |
3.0 |
|
|||
| ELS-2000 |
2000 |
10.8 |
7.6 |
4.3 |
3.8 |
|
|||
| ELS-2500 |
2500 |
10.8 |
8.1 |
4.7 |
4.1 |
|
|||
| ELS-3150 |
3150 |
13.6 |
10.2 |
6.0 |
5.1 |
|
|||
| ELS-4000 |
4000 |
13.0 |
10.8 |
7.6 |
6.5 |
|
|||
| ELS-6300 |
6300 |
20 |
17 |
10 |
9 |
|
|||
| ELS-8000 |
8000 |
22 |
17 |
13 |
12 |
|
|||
| ELS-9000 |
9000 |
24 |
19 |
15 |
13 |
|
|||
| ELS-12000 |
12000 |
32 |
26 |
18 |
16 |
|
|||
| ELS-18000 |
18000 |
49 |
39 |
27 |
24 |
|
|||
| ELS-25000 |
25000 |
68 |
54 |
38 |
34 |
|
|||
| ELS-38000 |
38000 |
103 |
82 |
57 |
51 |
|
|||
| ELS-54000 |
54000 |
146 |
117 |
82 |
73 |
|
|||
| ELS-80000 |
80000 |
216 |
173 |
121 |
108 |
|
|||
| Please consult the manufacturer for larger or smaller specifications | |||||||||
Product detail pictures:
Related Product Guide:
We know that we only thrive if we will guarantee our combined cost competiveness and high-quality advantageous at the same time for Quots for gear pumps for oil - ELS Series Polymer Melts Gear Pump – Vowa, The product will supply to all over the world, such as: Manchester , Armenia , Ottawa , We have won a good reputation among overseas and domestic clients. Adhering to the management tenet of "credit oriented, customer first, high efficiency and mature services", we warmly welcome friends from all walks of life to cooperate with us.
By Catherine
from New Zealand
- 2017.07.07 13:00
The quality of the products is very good, especially in the details, can be seen that the company work actively to satisfy customer's interest, a nice supplier.
By Arabela
from San Diego
- 2017.03.07 13:42
-
Wholesale Discount bucher gear pump - AE Serie...
-
China Wholesale High pressure gear pump Accesso...
-
Cheap price internal and external gear - NES S...
-
Manufacturer for sanitary gear pump - NES Seri...
-
China Factory for low flow gear pump - MEA Ser...
-
Manufactur standard GHK polymer pump - Drum Ty...